Epson 1410 is a popular printer model known for its high-quality prints, but it is not uncommon for users to encounter an error message that indicates the printer’s waste ink pad is full. This error message can cause the printer to stop working, and the only solution is to reset the waste ink pad counter.
Resetting the counter on an Epson 1410 printer can be done by following a few simple steps. In this blog, we will guide you through the process to reset the counter on your Epson 1410 printer.
Step 1: Download and run the Epson Adjustment Program for the Epson 1410 printer.
You will need to download and run the Epson Adjustment Program for the Epson 1410 printer. This program can be easily found online.
Step 2: Select Using the Epson Adjustment Program.
When using the Adjustment Program, it is important to carefully follow the instructions provided by the software. Firstly, it is recommended to disable any antivirus programs that may interfere with the program’s operations.
In addition, it is necessary to set the system time on Windows to November 2nd, 2007. This ensures that the Adjustment Program runs smoothly and accurately. It is important to note that the system time should be set back to the current date and time after running the program.
Moreover, the Adjustment Program can only be executed on Windows XP (Service Pack 2) compatibility mode. To activate this mode, access the properties of the Adjustment Program and locate the “Compatibility” tab. From there, select the Windows XP (Service Pack 2) option and save the changes.
By following these steps, you can ensure that the Adjustment Program runs properly and effectively, without any issues or errors.
Step 3: Check the box next to “Main Pad Counter”, then click on “Check” to display the current count.
Step 4: Click on “Initialization” to reset the counter to zero.
Step 5: Click on “Finish” to exit the Adjustment Program..
Step 6: Turn off the printer and disconnect it from the power source.
Step 7: Wait a few seconds, then reconnect the printer to the power source and turn it on.
The printer’s waste ink pad counter should now be reset to zero, and your printer should be working normally again.
In conclusion, resetting the waste ink pad counter on your Epson 1410 printer can be done by following the simple steps outlined in this blog. It is a quick and easy process that will save you the cost and hassle of having to replace your printer.